Following.
I'm looking for the exact same install bolt center to center distance.
I'm looking for the exact same install bolt center to center distance.
Roof mounted light bar
I have Polaris tip out windshield/wiper, looking for roof mounted light bar that lines up with two bolts holding roof in place. Would like low profile one row. Curved would be great!
Brands that will bolt up?
I think the total distance is 40 inches hole to hole. Seems all the ones I look at won't line up with bolt pattern.
Muz
Brands that will bolt up?
I think the total distance is 40 inches hole to hole. Seems all the ones I look at won't line up with bolt pattern.
Muz
1 - 11 of 11 Posts
Most likely is to fab up mounting bracket, to fit the light bar.I have Polaris tip out windshield/wiper, looking for roof mounted light bar that lines up with two bolts holding roof in place. Would like low profile one row. Curved would be great!
Brands that will bolt up?
I think the total distance is 40 inches hole to hole. Seems all the ones I look at won't line up with bolt pattern.
Muz
I'll check mine when I get home. My dad gave me a lightbar and put it on without having to drill holes. The brackets are L shaped and I just turned one around. It isn't 100% perfect but works for me. I just didn't want to drill into the roof.
Hellow P.T,
Do you have a brand or a link by chance?
One other question do you think other 42 inch curved would work if you flipped the mounts like you did?
Thanks Muz
Do you have a brand or a link by chance?
One other question do you think other 42 inch curved would work if you flipped the mounts like you did?
Thanks Muz
Messaged you a link to lightbar I have, comes with everything you need except I put a rocker on mine,Hellow P.T,
Do you have a brand or a link by chance?
One other question do you think other 42 inch curved would work if you flipped the mounts like you did?
Thanks Muz
Comes with its own switch but I like the rockers
Good morning,I went with 42in curved bar, line up great with roof bolts, just turn mounts facing in at bottom instead of out
Would you mind sharing the brand/link to the 42" curved lightbar you used? I am wanting to do something similar to my2023 XP 4 1000 but wasn't sure the brand and where it was purchased. Thanks P.T.
Rob
I’m am curious also on the link for your light bar.
I went with the below light bar and it worked well. Easy install and looks good. Pictures attached.I’m am curious also on the link for your light bar.
AUTOSAVER88 LED Light Bar 4D 42... https://www.amazon.com/dp/B01MFEMM7Q?ref=ppx_pop_mob_ap_share
1 - 11 of 11 Posts
Polaris General Forum
A forum community dedicated to Polaris General owners and enthusiasts. Come join the discussion about modifications, troubleshooting, maintenance, performance, and more!
Full Forum Listing
Recommended Communities
