Polaris General Forum banner
1 - 2 of 2 Posts

·
Registered
Super Graphite 2021 XP 1000 Deluxe with RC
Joined
·
148 Posts
I took Pirate's advice and removed the Frogskin cover plate, then taped it down on the back side with some 1/2" strips of aluminum tape. This pulled the Frogskin cover tight and eliminated a lot of spots where the dust could enter. I'm also running the Outerwears pre-filters under the hood as well as their pre-filter sock on the air filter.

Very little dust gets by with this setup. I still blow out the clutch on a regular basis.
 
1 - 2 of 2 Posts
Top