So I was riding the other day and I noticed temp was quite high, come to find out fan wasn't running and still isn't. So I checked both the relay and the 25amp c.b. In the fuse box. Both check good. Checked the coolant temp sensor by unplugging it and it throws check engine light and temp icon. But still no fan. I checked the ground to the harness where the fan plugs in. Ground is 001ohms. So not a grounding issue. Basically checked everything but still not getting power. So I'm lost as to my next move here. Anyone else experience this problem too?
elliottgibson
I'll bet it was a rubbed wire going to ground somewhere in the wiring harness. Its pretty common on these machines that do not have the most rigid frame. Its twisting anytime your in rough stuff.
So take a little time, wrap those locations with split loom tubing, 4" tie-wraps and layers of electrical tape. Got 'em all over my General.
Pirate
So take a little time, wrap those locations with split loom tubing, 4" tie-wraps and layers of electrical tape. Got 'em all over my General.
Pirate
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
