Polaris General Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
73 Posts
Discussion Starter · #1 ·
Hi all, I got a 9" lowrance/polaris gps, and trying to mount it..Looks like options might be, on top of dash, but lose a little visibility which I don't like, or figure out a way to mount it over the large square hole in the dash.. How does one take the dash apart to put metal behind it for reinforcements ? Or take the panel out to add more rocker switches ?
Anyone ?
 

·
Senior Member
Joined
·
1,563 Posts
Jello Jeep PM me with your email and I will send you a PDF on the heater install which covers all that.
 

·
Senior Member
Joined
·
1,563 Posts
Also go to Heater Defroster thread pg 4 . Pull down gently but firmly without tearing your fingernails off on the top edge of the center box in the dash. Pull outward on the top first. It will open what you will need for running wires and such. With the box out you can now pull the switch panel. straight ahead is the access for running your wires under the hood to the power buss.
 
1 - 5 of 5 Posts
Top